Use this for your regular cleaning.
Vacuum tiles (or dry microfibre mop) to remove loose grit from the surface
Clean traffic areas using a damp microfibre flat mop (clean water only – no chemicals).
Spot clean any spills, marks or stains using an alkaline cleaning agent such as Slique Heavy Duty chemical. Make sure dilution instructions are followed carefully.
Rinse lightly with CLEAN water to remove chemical residues, and dry using an old towel – do not leave to dry on the floor.
Use this for periodic cleaning, or when there is a build-up not removed by daily care.
Vacuum tiles (or dry microfibre mop) to remove loose grit from the surface.
Machine scrub all grout lines and tile surfaces using a solution of tile cleaner suitable for your tiles, such as Slique Heavy Duty chemical. Leave chemical solution to dwell on the surface for a few minutes before agitating by machine. Use an auto-scrubber if available, or otherwise use a slow speed polishing machine and wet vac.
Repeat for heavily stained areas if required.
Rinse off using clean water. Extract off the floor using a wet vac. DO NOT leave to dry on the surface.
Need professional help?
This care regime is designed to maintain a good-condition porcelain or ceramic tiled area. If professional restoration is required to get the surface back into as-new condition first, contact Slique for a free consultation.